Rainbow Electronics MG260 - Manual (Page 15)

MG260 Product Specification
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without prior written
agreement.
Feature Information
GSM Supplementary
Services Call Forwarding, Call Barring
Multiparty
Call Waiting, Call Hold
USSD
Data / Fax Data circuit asynchronous, transparent, and non- transparent
up to 14400 bits/s.
Fax Group 3 compatible
SIM interface 3 V or 1.8V SIM interface
GPS GPS L1 civil frequency 1575.42 MHz
50 channels GPS receiver
Accuracy:
2.5 m CEP
GPS 2 m CEP (depending on accuracy of correction
data); SBAS/WAAS supported.
Start-up times:
Hot start: < 1 sec
Warm start: 32 sec
Cold start: 33 sec Signal reacquisition < 1 s Protocols:
NMEA-0183 input/output
UBX binary input/output
RTCM in
Interface available for Dead Reckoning
Real Time Clock Real Time Clock with calendar and alarm
RTC update with GPS information
Temperature sensor Internal sensor for module temperature monitoring via
AT commands or embedded OpenAT application.
Advanced antennas
management Single Coax connectivity
GPS active antenna management (3 V / 5 V compatible)
with internal protection circuit
Possible use of an auto-powered GPS active antenna.