8 output signals – Rainbow Electronics MG260 User Manual
Page 46
Advertising
MG260 Product Specification
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without prior written
agreement.
2.6.8 Output signals
2.6.8.1 Power supply for external devices
This output can be used to power some external functions. VCC has to be used
as a 2.8 V digital power supply. This power supply is available when the module
is on.
Pin description
Signal
Pin #
I/O
I/O type
Description
VCC
60
O
Supply
2.8 V Power supply for external
digital devices
Advertising