Warning, Maintenance, Care and maintenance – BabyTrend 8665 - TREND HIGH CHAIR - ORANGE OAK User Manual

Page 12

Advertising
background image

Copyright © 2007 - 2008, Baby Trend Inc., All Rights Reserved.

MAINTENANCE

10

CARE AND MAINTENANCE

WARNING:

Harness Straps and Basket are NOT washable.

Dishwasher safe Tray Insert:

The Tray Insert is dishwasher safe to 160 degrees Fahrenheit. Do not use scouring pads

on the Tray Insert as they will damage the surface and the Tray Insert will become more

difficult to clean.
High Chair/Tray:

Clean High Chair and Tray after each use using mild household dish soap.
Please use only a soft bristle brush, sponge or cloth to clean the surface or remove particles

of food.

DO NOT

submerge High Chair and Tray in water: Surface clean only.

To remove fabric pad for washing:

Remove Harness Straps by pushing Harness Attachment Tabs through the Harness slots on

the Seat Back, Seat Base, and Seat Pad.
Remove Elastic Loops from Attachment Tabs on Seat Base and Seat Back.
Machine Wash COLD DELICATE CYCLE with non chorine based Laundry Detergent.

HANG DRY. DO NOT USE BLEACH. DO NOT MACHINE DRY.

Vinyl Pad:

Please use sponge or cloth with mild household detergents to surface clean the vinyl seat

pad. DO NOT machine wash the vinyl seat pad. To remove the vinyl seat pad see above.
To attach or remove Basket

NOTE: Certain Models will have a Basket underneath the seat for storage. These Models

will be packaged with the Basket already attached to the Seat Base.
To remove Basket

The Basket is attached by four snaps. Release these snaps for removal.
To attach Basket

Feed snap strips around Basket Slots underneath Seat Base. Press firmly on the four snaps.

Fig. 25

TO ATTACH OR REMOVE TOY

TO ATTACH OR REMOVE MUSIC TOY

The Music Toy (Part # 16) is attached through the

suction cup on the bottom of the Toy. To attach

simply press the Toy on the Tray, to remove lift up

a part of the bottom of the cup.
TO ATTACH OR REMOVE TEETHING TOY

Press the Teething Toy (Part # 17) connector into

the curved slot in Tray edge and snap bottom

of connector over lower lip of Tray. Reverse to

remove the Toy (Fig. 25).

Advertising