BabyTrend 8665 - TREND HIGH CHAIR - ORANGE OAK - Manual (Page 6)

Copyright © 2007 - 2008, Baby Trend Inc., All Rights Reserved.
ASSEMBLY
4
Fig. 4
3. Slide the left and right sides’ Height Bracket
onto the Seat Base (Fig. 3). Snap the brackets
in place (Fig. 4).
4. Slide the Footrest onto the Seat Base as shown
in Figure 5. Snap Footrest into place.
5. Insert the front tube of the right side Upper
Frame Assembly into the Height Bracket
(Fig. 6). The front tube is easily distinguished
from the rear tube by the array of holes located
on the backside of the tube.
6. Squeeze the Red Release Handle and push the
tube through the Height Bracket until it locks
on the highest position (Fig. 7).
7. Repeat Steps 5 and 6 for the left side Upper
Frame Assembly (Fig. 8).
Fig. 3
Fig. 5
Height Bracket
Height Bracket
Footrest
Upper Frame Assembly
Height Bracket
Red Release
Handle
Fig. 6
Fig. 7
Fig. 8