BabyTrend 8665 - TREND HIGH CHAIR - ORANGE OAK - Manual (Page 5)

Copyright © 2007 - 2008, Baby Trend Inc., All Rights Reserved.
IMPORTANT!
To ensure safe operation of your product,
please follow these instructions carefully. Please keep these
instructions for future reference.
IMPORTANT!
Before assembly and each use, inspect this
product for damaged hardware, loose joints, missing parts or sharp
edges. NEVER use if any parts are missing or broken.
IMPORTANT!
Adult assembly is required.
IMPORTANT!
Always check that the high chair is locked
in the open position before using.
ATTENTION:
Carefully remove parts from box. Check that you
have all the parts for this model before assembling
the high chair. NOTE: Certain High Chair models
are packaged with the High Chair Seat Fabric and
Seat Insert already attached to the Seat Back.
TO ASSEMBLE SEAT
1. Place the Seat Base on a flat surface as shown
in figure 1.
2. Join the Seat Back to the Seat Base using the
Seat Back Hinge Rod as shown in figure 2.
The rod is inserted from right to left as shown.
Fig. 1
ASSEMBLY
3
Fig. 2
Seat Back
Seat Base
Seat Back
Hinge Rod