American Car Craft Mustang Fender Top Caps Polished Illuminated V6 & GT 5.0 2005-2009 User Manual
American car craft instructions
AMERICAN CAR CRAFT INSTRUCTIONS
2005-2009 MUSTANG FENDER TOP CAPS ILLUMINATED 2pc
PART #273050
Parts Included:
2-Fender Caps Illuminated
8-ACC Threaded Flange Type Fender Bolts
8-1/2” 6/32 Stainless Truss Head Screws
4-Thick Small Washers
8-1” Decorative Chrome Caps w/Velcro Donuts
Introduction: This hot new product will be the finishing touch to your new Mustang. It’s a simple to install
accessory that will make a huge difference to your new engine bay.
Liner Information: Your new accessories will come to you with a protective surface liner. Leave this liner in
place until the installation is complete to prevent finger prints and or possible scratches during installation.
1. The first step will be to remove all of the factory fender bolts and replace them with the ACC threaded
flange type fender bolts. Be careful not to over tighten these bolts as they still hollow at this point and
can snap. Just snug will work perfect. These will serve as the mounting perches for your new fender