American Car Craft Corvette Side Marker Trim Rear 2Pc with Corvette script Polished 1997-2004 C5 & Z06 User Manual
American Car Craft For the car
AMERICAN CAR CRAFT INSTRUCTIONS
C5 POLISHED STAINLESS CORVETTE STYLE SIDE MARKER
KIT
PART#032051
PARTS INCLUDED:
___2-Stainless Side Marker Trim
___1-Adhesive Promoter Pack
___1-Adhesive Promoter Tube
___2-17” Lengths ¼” Chrome Trim
1. Thoroughly clean the factory plastic side marker with alcohol to remove any and
all wax and dirt. Once this has been done swipe the entire factory lens with the
adhesive promoter pack provided (save enough promoter for the opposite side)
allow a few second to dry.
2. Before you permanently attach the stainless bezel set it in place to get acquainted
with its position. A properly placed bezel will set perfectly centered evenly all
around the perimeter of the factory lens. Once you can see just how it sets in
place, peel the release liner from the back of your new bezel and carefully set in
place. Press firmly along the entire stainless bezel to make sure you have a nice
complete bond.