American Car Craft Challenger 5.7 Engine Shroud Trim Kit Polished 5.7L 2008-2013 14Pc(Now 17Pc) User Manual
American Car Craft For the car
AMERICAN CAR CRAFT INSTRUCTIONS
CHALLENGER ENGINE SHROUD KIT 5.7
PART#153008
patent pending
ITEMS NEEDED: ITEMS INCLUDED:
Isopropyl alcohol ___1- Adhesive Promoter
Household acetone ___1- Adhesive Promoter Tube
Straight razor blade ___6- Chrome Engine Molding Strips
___1- Chrome Shroud Cover Molding Strip
___1- Stainless Cover
___1- 5.7L & V8 Stainless Letters
Your cover comes to you with a protective liner. Do not remove liner until step 3 has
been completed.
1. The first thing that must be done in order to install your new kit is to prep the
surface area of the engine shroud. THIS IS A VERY IMPORTANT STEP!
PLEASE FOLLOW CLOSLEY! You will notice 3 ribs on either side of the engine
shroud. Scrub these areas firmly first with household acetone, let dry then with
household isopropyl alcohol, let dry and be sure to remove all flash residues from
the surface. This composite plastic is stain resistant from the factory and is difficult
to bond to, so be sure to scrub these areas very well. Once completely scrubbed