American Car Craft Corvette Front Side Marker Light Grille 2Pc Laser Mesh Polished 1997-2004 C5 & Z06 - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
C5 CORVETTE FRONT CORNER MARKER LIGHT GRILLES
PART # 032025
PARTS INCLUDED:
___2-Stainless Mesh Marker Light Covers
___1-Adhesive Promoter Tube
This new grille kit is a beautiful and unique accessory designed to be the finishing touch when
added to your C5 containing our brake duct and front fog light grilles.
1. Thoroughly clean the corner marker to remove any and all road grime, dirt and wax.
Apply the adhesive promoter provided along the entire perimeter of the marker light and allow a
few seconds to dry.
2. Your new grilles have been sent to you flat in order to force you to shape the grille by hand.
This will insure a nice perfect fitment. It is CRITICAL that the shape be perfectly matched in
order to insure that the grilles do not become detached long term. This can be done with your
hands very easily and if you think for a moment about the fact that metal will not bend itself out
of place then you could expect that the grilles will stay perfectly in position so long as you do not
apply the grilles using the adhesive attachment tape to maintain its shape. Take a little time to
achieve a nice contour to the factory shape and your grilles will stay in place forever.
3. Now that you have achieved a nice contour of the grilles simply peel the release liner from the
back of the grille and then carefully place them into position pressing firmly along the grille
perimeter to insure a nice bond.
TECH TIP: American Car Craft has available a lenses blackout kit #C509-4A (ask your favorite Corvette
Retailer how to order one). This kit is a thick lenses protector made of a dark smoke color. This kit will
greatly enhance the appearance of the diamond mesh grilles offering a sleek sparkling look to the grilles.
This appearance will also help the grilles to match the dark background of the brake duct and fog light
grilles.