Xerox FreeFlow® Print Server version 6.0 - Manual (Page 15)

System Guide 1- 7
Gateway and Network Configuration
Changing attributes support
These attributes can be changed via ‘SET’:
• prtGeneralServicePerson
• prtAuxillarySheetStartupPage
• prtGeneralPrinterName
• hrFSLastFullBackupDate
• hrFSLastPartialBackupDate
• sysContact
• sysLocalization
• sysName
For additional information on attributes, MIBs, and localization,
see device profiles.
SNMP MIB support
The Xerox FreeFlow Print Server SNMP MIB files use the Xerox
Common Management Interface (XCMI) version 4.0. The
following list indicates the MIB files included for this version of the
Print Server software:
• rfc1213 - RFC1213-MIB (MIB-II) - specifically system, if
numbers, at, ip, tcp, icmp, udp, snmp
Localization of
Attributes Y Y N N
Finishing Capability for
a Device MIB Y N N Y
Finishing Capability for
a Supply MIB Y N N Y
Finishing Capability for
Attributes Y N N Y
Print Working Group
Job Monitor MIB Y Y N Y
Auto Meter Reading/
Billing Y Y N Y
Enhancement to
attributes Y Y N Y
Feature
DT 61XX
and DP
1xx
EPS 1XX iGen
Nuvera
1xx