Xerox FreeFlow® Print Server version 6.0 - Manual (Page 93)

System Guide 7- 15
Troubleshooting
LP/LPR and the ASCII job tickets
The following procedure is used to verify that the attributes and
options are correct:
1. Open a terminal and login as root
2. Enter: setenv LD_LIBRARY_PATH/opt/XRXnps/lib
3. Enter: [/home/rlech/bin]getAttrsTv
4. The program executes and lists valid options.
5. Enter: g j , the job number from Job GUI>
6. The job attributes display.
NOTE: For detailed procedures see the Online Help.
Rebooting and restarting
Recovery procedures throughout this guide instruct you to either
reboot or restart the software.
To reboot the system and perform a file system check, perform the
following:
1. Place your mouse cursor in the background outside of the
Xerox FreeFlow Print Server Print Services window.
2. Right-click and select [Programs].
3. Select [Terminal].
4. Put your mouse cursor in the window and type: su
5. Select <Enter>.
6. Type in your root password.
7. Select <Enter>. A # symbol displays.
NOTE: When entering text, do so in lower-case because UNIX is
a case sensitive system.
8. Type: sync; sync; halt
9. Select <Enter>. The system reboots.
10. A Program Terminated message and an OK prompt display.
Type boot -s
11. Select <Enter>. The system reboots.
12. When you receive the following message, “Type Ctrl-d to
proceed with a normal startup, (or give root password for
system maintenance)” type the root password again.
13. Select <Enter>.
14. Select the <Ctrl> and <d> keys on your keyboard at the same
time to complete the boot.