Xerox FreeFlow® Print Server version 6.0 - Manual (Page 108)

8 - 1 0 System Guide
Hints and Tips
/opt/XRXnps/bin/setBind128 Enables you to bind 128 pages. Black and
white
/opt/XRXnps/bin/setpdfsuppresscsa When PDF files are created with
Adobe Acrobat Distiller 5.0 and
above, the output may have color
management applied by default.
This results in text printing as
halftoned images. The Xerox
FreeFlow Print Server is rendering
the file correctly, however, this is
often not a desired output. Black and
white
/opt/XRXnps/bin/
setpantonetoprocess This script determines how
pantone calls are handled by the
Xerox FreeFlow Print Server. Color
/opt/XRXnps/bin/setpdfbinarycheck Enables/Disables PDF binary
check. System default is enabled.
If you disable it, PDF performance
may be impacted. Both
/opt/XRXnps/bin/setsweepdither Enables/Disables sweep dither
level. Customer jobs that contain
Sweeps that are created with PS
Level 3 Printer Driver using the
SmoothSHading PostScript
operator may exhibit Contours
when printed on the Xerox
FreeFlow Print Server. Default is
on and set to 1. Color
/opt/XRXnps/bin/setonesideduplexat
devicedeact This utility command allows a
combination of duplex and simplex
subset finishing.
Disabling the utility causes the
Xerox FreeFlow Print Server
PostScript decomposer to ignore
the commands to eject a duplex
page as a one-sided page. The
entered job prints in duplex mode.
This is the current default behavior
of the decomposer.
Enabling the utility, the
decomposer prints in simplex
when it encounters the appropriate
PostScript command that
deactivates duplex mode. The
resulting output is a combination
of duplex and simplex pages.
Both
Utility Change Description Focus