Xerox FreeFlow® Print Server version 6.0 - Manual (Page 107)

System Guide 8- 9
Hints and Tips
/opt/XRXnps/bin/setFontSize In 3.1, allows user to set the font
size on the main GUI to a larger
and more visible size. Both
/opt/XRXnps/bin/setimagepath Disables/Enables Xerox Image
Path. any problems that
necessitate using this utility should
be reported to Xerox development
ASAP. Color
/opt/XRXnps/bin/
setlcdsDJDEsemicolon Allows for correct printing of a
DJDE that has the incorrect
termination of;END; instead
of,END, (J11patch compatibility). Both
/opt/XRXnps/bin/setcddsDJDEspimm Enables the system to ignore 0x)b
in between DJHDE begin records
(J11 patch compatibility). LCDS
/opt/XRXnps/bin/setlcdsPmodeSwop Disables/enables swopping of
BEGIN values when there was a
page orientation switch (J11 patch
compatibility. LCDS
/opt/XRXnps/bin/setlpcopycount Default is to ignore an LPR Copy
Count of 1. Utility to set lpr to
accept a copy count of 1. LCDS
/opt/XRXnps/bin/setpapdbootswitch Sets Appletalk behavior for
AdboePS8.6 foreground job
problem if font list is large. Both
/opt/XRXnps/bin/setsetlineterm
/opt/XRXnps/bin/setsetpclcontrol
(Option1) Sets the default PCL decomposer
line termination mode (that is,
CR.LF). Use “setpclcontrol” tool in
3.1. Black and
white
/opt/XRXnps/bin/setpclcontrol
(Option2) PCL custom size factory default
script allows the Xerox FreeFlow
Print Server to better match HP’s
variations on customer size
imaging. Black and
white
/opt/XRXnps/bin/setpclcontrol
(Option3) PCL saves resources function.
Gives capability to save pcl
resource from memory to disk on a
job by job basis. Black and
white
/opt/XRXnps/bin/setVPSoption On the socket gateway mainframe
echo commands are stripped by
default. If non VPS streaming
clients are being used, this utility
must be run to avoid data loss. Black and
white
Utility Change Description Focus