Xerox FreeFlow® Print Server version 6.0 - Manual (Page 76)

6 - 1 0 System Guide
Accounting and Billing
• Sheets purged by the system for fault recovery or image
quality adjustment.
Billing meters
The Xerox Billing Meter window tracks the time and date of the
last meter read and the following Print Billing Report options are
retained between restarts:
• Queue name for printing the Billing Report.
• Customer ID (Customer Name)
• Machine ID (serial number).
The printing information is pre-loaded and only needs to be
entered once in the system. The customer or service
representative completes the entry and prints the Billing report.
This stores the values. But if the values stored are in error in some
way, they are editable.
Table 6-1 Billing Meters for Regions
Market
Region
Billing Meters for Region
Region 1 Meter A: Total impressions to an output destination
including Administration Pages.
Meter B: Total impressions for each image of the job
up to and including the last sheet of the 10th set.
Does not include Administration Pages.
Region 2 Meter 1: Total impressions to an output destination
including Administration Pages.
Meter 2: Total impressions printed on sheets wider
than 9”. Includes Administration Pages.
Meter 3: Total impressions for sets 11-18. Begins
counting with the first image in set 11 and stops after
the last image in set 18. Does not include
Administration Pages.
Meter 4: Total impressions in set 19 of every
document printed. Does not include Administration
Pages.
Region 5 Meter A: Total impressions to an output destination
including Administration Pages.