Peterson Strobe Center 5000-II User Manual
Page 18
Page 16
Key #1 shifts the cursor Left by one space.
Key #2 shifts the cursor Right by one space.
Key #3 backspaces and deletes one character in the
name.
Key #4 cancels the New file name and returns to the
Temperament Menu.
Key #1returns to the previous screen.
Key #2 advances to the next screen.
Key #3 cancels the New file name and returns to the
Temperament Menu.
Key #1 proceeds to the Editing sequence.
Key #2 permits DELetion of old TMPR file.
Key #3 returns the tuner to the Run Mode, using no
TMPR or STRCH files.
Key #4 returns to the Temperament Menu screen.
PICK NAME – ABCDEFGH
IJKLMNOPQRSTUVWXYZ0
1 23456789
TMPR=____
<–– ––> BKSP
CNCL
1
2
3
4
c. Scroll through the letters and numbers using the #1 and #2 function keys as the Left Cursor and Right Cursor
respectively. Move the cursor to the corresponding letter, space (directly following digit "9"), or number in the
4-character NAME of your new Custom Temperament. Press the Enter key to select the desired character at the
cursor location. Press the #3 BKSP (Backspace) function key to delete the previous character you have just
entered. The #4 function key is used to cancel the newly opened file and returns you to the Temperament Menu.
Once the fourth letter or number of the name has been selected, the display screen will permit you to confirm the
file name you have chosen:
THE NAME CHOSEN FOR
TMPR IS: XXXX
REDO OK CNCL
1
2
3
4
d. If the characters were entered incorrectly, you can press the #1 function button and re-enter the name of the custom
temperament. You may choose to Cancel the entry of a new temperament and to return to the Temperament Menu.
To Cancel, press the function key #3. Any existing temperament or stretch files will be stopped as the tuner returns
to the normal RUN Mode screen.
Press the #2 function key to edit the scale values for the temperament file name you have selected. The tuner will
first check its memory to see if the name you have selected has already been used. A warning screen will appear
if the name has been previously stored in the custom user memory:
TMPR = XXXX
ALREADY EXISTS
NO
EDIT DEL RUN CHNG
1
2
3
4
e. Use the #3 function button to return the tuner to the Run Mode using no temperament or stretch files. When you
choose to go back and enter a different name for the custom temperament, press the #4 Function key to return to