Peterson Strobe Center 5000-II - Manual (Page 24)

Page 22
Key #1 deletes file and returns to TMPR Menu.
Key #2 returns to the Temperament Menu.
Key #3 returns to the Temperament Menu with no
changes.
Key #4 selects TMPR file in memory to copy from.
Key #1 copies file and proceeds to the EDIT screen.
Key #2 returns to the Temperament Menu.
to DELete the previously used TMPR file name from your custom temperament memory locations. Whenever you choose
to Delete a custom TMPR file, the tuner will request confirmation of the file deletion before performing the erasure:
DELETE TMPR = XXXX
ARE YOU SURE?
YES NO
1 2 3 4
Choose the #2 function key to return directly to the Temperament Menu without deleting the selected TMPR file or copying
a file. Use the #1 function key to Delete the selected custom TMPR file. After deleting the file, the tuner returns to the
Temperament Menu.
If, instead, a valid name for the new temperament file had been created, the display screen will change to:
COPY THIS TMPR =
XXXX XXXX XXXX XXXX
XXXX XXXX XXXX XXXX
CNCL SLCT
1 2 3 4
Use the #3 function key to return the tuner to the Temperament Menu screen with no copy file created.
Use the Pitch Down and Pitch Up Keys (Down Arrow - cursor forward and down; and Up Arrow - cursor up and back) to
scroll the cursor through the programmed temperaments. When the cursor is on the eighth Name on any page of stored
temperaments, press the Down Arrow key again and the tuner will display the next memory page of your custom
temperaments. Similarly, when the cursor is on the first Name of any custom temperaments screen, pressing the Up Arrow
key will show the previous page of custom or preprogrammed temperaments.
When the cursor is on the temperament memory file you desire, press the #4 function key to select that temperament into the
operation buffer of the tuner. The display will then proceed to a confirmation screen:
COPY XXXX TO YYYY
ARE YOU SURE?
YES NO
1 2 3 4