Peterson Strobe Center 5000-II - Manual (Page 36)

Page 34
Key #1 deletes file and returns to STRETCH Menu.
Key #2 returns to the STRETCH Menu.
Key #1 copies a custom STRCH file to a new name.
Key #2 deletes a custom STRCH file from memory.
Key #3 returns the tuner to the Run Mode using standard
unstretched tuning values.
Key #4 returns the tuner to the STRETCH Menu.
Key #1 shifts the cursor Left by one space.
Key #2 shifts the cursor Right by one space.
Key #3 backspaces and deletes one character in the
name.
Key #4 cancels the New file name and returns to the
Stretch Menu.
DELETE STRCH = XXXX
ARE YOU SURE?
YES NO
1 2 3 4
Choose the #2 function key to return directly to the Stretch Menu without deleting the selected custom STRCH file. Use
the #1 function key to delete the selected custom STRCH file. After deleting the file, the tuner returns to the Stretch Menu.
c. COPYING AN EXISTING CUSTOM STRETCH FILE TO A NEW NAME
COPY/DEL MENU
COPY DEL RUN BACK
1 2 3 4
Use the #1 function key to Copy an existing STRCH file to a new custom STRCH file with a new name. When the Copy
function key is pressed, the screen first asks for a new name to which the existing STRCH file will be copied:
PICK NAME – ABCDEFGH
IJKLMNOPQRSTUVWXYZ0
1 23456789
STRCH=____
<–– ––> BKSP
CNCL
1 2 3 4
Scroll through the letters and numbers using the #1 and #2 Function keys as the Left Arrow and Right Arrow respectively.
Press the #3 function key to reenter the previous letter or number in the 4-space name of your new custom stretch. Press
the #4 function key to return to the COPY/DEL menu screen.
When the fourth letter or number of the name has been selected, the tuner will first check its memory to see if the name you
have selected has already been used. A warning screen will appear if the name has been previously used by another custom
STRCH file: