Peterson Strobe Center 5000-II - Manual (Page 26)

Page 24
Key #1 calls up the Setup Menu.
Key #2 toggles the current Image Clarifier setting shown
on the third line of the LCD screen.
Key #1 will call up additional options menu.
Key #2 will bring you to the temperament and stretch file
choice menu.
Key #3 will return the tuner to the Run Mode
Key #4 will call up factory diagnostics.
Function Key #1 calls up the TEMPERAMENT
MENU
Function Key #2 calls up the STRETCH MENU
Function Key #4 returns to the Main SETUP MENU
Key #1 is used to Start a stretch file; also to use and/or
edit a new or existing stretch file.
Key #2 Copies or Deletes a Custom stretch file.
Key #3 returns the tuner to the Run Mode.
Key #4 Stops an active temperament or stretch file.
KEY = xx
A = 440 00 ¢
HI
SETUP IMAG
1 2 3 4
a. Press the #1 Function key to access the SETUP MENU.
SETUP MENU
PLEASE SELECT MODE
OPTN FILE RUN DIAG
1 2 3 4
b. Press the #2 Function key (FILE on the screen) to bring up the FILE screen under the SETUP MENU.
FILE MENU
PLEASE SELECT MODE
TMPR STRCH SETUP
1 2 3 4
c. Press the #2 Function Button to bring up the STRETCH MENU.
STRETCH MENU
PLEASE SELECT MODE
START COPY
–EDIT –DEL RUN STOP
1 2 3 4
d. Press the #1 key labeled START-EDIT to call up the listing of all preprogrammed Stretch files, and any custom
Stretch files you have saved in the memory. The display screen will first show the 8 Stretch files preprogrammed
into the SC-5000 II.