Airbagit Air Kit User Manual
Page 13
11. If you are only installing SPINDLES, or COILSPRINGS, then remove the
factory spindle and Coil and re- install Spindles and coils at this time.
12. Unbolt upper control arm cross shaft from upper control arm gusset leaving cross
shaft installed in upper control arm as it will not be reused because our
aftermarket upper arms for the s10 come with new cross shafts.
13. Install aftermarket upper control arms with ball offset towards the front of the
truck by bolting cross shaft to upper control arm gusset.
14. Bolt upper ball joint to upper position of spindle.
15. Install bags and upper brackets before reinstalling wheels.
16. With front end assembled and all nuts and bolts tightened lower vehicle down and
make sure air suspension is working properly.
17. Be sure to get truck aligned at the ride height that it will be driven at the most.