Airbagit Air Kit User Manual
Page 5
Run Black Nylon Airhose from outlet port on the tank, to the Valve
Port on the topside of the Plug & Play
Run airhose from the Compressor outlet to the CheckValve on tank.
Gauge & Switch Panel is completely prewired. Determine where you
are going to place the control panel, then trim wire length if
necessary, connect each COLOR CODED wire into the backside of
the gauge. Plug the other end into the Molex Connector on the Plug
& Play box. Each switch has 3-Positions, one for up/neutral/down.
They control each Airbag independently. Each Gauge has 2 needles
giving you control over the air pressure in all 4 bags independantly.
Then connect the red 8-Gauge wire to the Battery, and the other wire
to a VERY GOOD clean ground on your frame or engine.
You can be sure that we include everything you need for your kit,
right down to the Teflon tape for the bag and strut fittings.
Other manufacturers sell you a kit that is Universal, costs more, and
you get less for your money. Our International customers will find
that the extra cost for shipping is much less money than buying from
a distributor. Email us at
for International
shipping quotes that are lower than shopping cart checkout prices.