Derale Performance HO RAD Fan Dual Mount Bracket, Ratchet Style - Manual

Installation Instructions
Part No.
Derale Cooling Products, Los Angeles, CA 800.421.6288 • 323.266.3850 • Fax 323.263.3948 • www.derale.com
16200 - Dual Mount Brackets
Instruction sheet number 16200
Warning:
Installation of an electric fan should only be undertaken by those with mechanical knowledge
who are familiar with working on vehicles. AlwAys use eye protection (goggles, safety
glasses or shield). Park the vehicle in a well lit area, on level ground and apply the parking
brake. Disconnect the battery before beginning. After installation, reconnect battery and
check all lights and electronic functions thoroughly. Before starting the vehicle, make sure
no tools or any other items underhood will interfere with or be drawn into the fan blade
assembly. Failure to follow instructions can lead to severe damage and personal injury.
Derale 162XX Series Pusher/Puller Fans can be doubled up to cool larger areas using these
Siamese mount brackets and our patented modular mount system.
Parts List
2.......... siamese mount brackets
2.......... siamese mount bracket connectors
4.......... #10 X 1.5” sheet metal screws
NOTE:
Check kit contents before
beginning installation.
Typical dual fan installations. Refer to the installation sheets
included with the individual fans (16217) for more details of
different mount configurations and detailed instructions.
Dual fan mount using
nylon tie rods
Dual fan mount using
splined ratchet brackets
Splined ratchet
bracket*
M6 square mount
nut*
“Siamese” mount
bracket
Fan*
Fan*
“Siamese”
mount bracket
connector
#10 Sheet
metal screws
M6 x 15
socket screw*
Joining two 162XX Series fans together
* Items are included with
162XX Series Fan Kits