Installation instructions (continued) p/n: as-1007, Reminder – S&B Filters Cold Air Intake Scoop AS-1007 User Manual

Page 4

Advertising
background image

15461 Slover Ave., Fontana, CA 92337 - Phone: (909) 947-0015 - Fax: (909) 947-0603 -

www.sbfilters.com

INSTALLATION INSTRUCTIONS (continued)

P/N: AS-1007

PERFORMANCE TESTING

• Engage parking brake and start your engine. Listen for abnormal noises. If an air leak is detected, re-inspect hoses and connections as they may need to be

repositioned and tightened.

• S&B FILTERS recommends that you keep your OE intake system in the event it is required in the future.

• In order to maintain your warranty, all connections and components must be checked periodically for alignment and for proper tension on all connections.

Failure to do so may void your warranty.

• Use only S&B FILTERS cleaning and oil products to service your filter. Using any other brand oil and or cleaners on your S&B air filter may void your warranty.

SEE EXPLODED VIEW ON PAGE 5

4

RELATED ITEMS FOR YOUR

PURCHASE

• Air Filter Wrap (S&B P/N: WF-1023)

• Snow Plug and Bracket Kit

(S&B P/N: AS-1008)

• Replacement Clip Nut Hardware pack

(S&B P/N: HP1225-00)

Scoop Obstruction:
Regularly inspect the entire Scoop Inlet for any obstruction or debris that may impede the flow of air.

Decreased Ride Height
Once the Scoop has been installed, please be aware that the Scoop sits lower than the bumper and drive accordingly
to avoid damage to the scoop or vehicle. Make sure there is plenty space between your tire and the scoop before
driving. The scoop system may not work with aftermarket wheels and tires.

REMINDER!

Water Ingestion Disclaimer:
This product is intended for general highway use only! Under normal driving conditions water ingestion is usually not
an issue; however, if the product becomes submerged from rain splashes or mud puddles due to harsh rains or
flooding the engine may ingest water which could cause severe engine damage. Do NOT use this product when
crossing any body of water including but not limited to large puddles, streams, rivers or lakes.

If your engine ingests water, this could cause severe engine damage by hydro-lock or other conditions. Care should be
taken to avoid these driving conditions. ENGINE DAMAGE CAUSED BY THE INGESTION OF WATER INTO THE
ENGINE IS THE DRIVER’S RESPONSIBILITY AND IS NOT COVERED BY S&B FILTERS!

Advertising