Vonnic C909IP H.264 Wireless 802.11b_g_n IP Network Camera - Manual (Page 24)

H Series IP Camera User Manual – with Pan/Tilt of CMOS
24
7.4.4 FTP Setting
Figure 30
In order to use FTP function, user should apply username and password on the
FTP server first. And please apply some storage, and the authority to write and
create sub-category into it.
7.4.5 Alarm Server Setting
Figure 31
Please confirm if you have connected to alarm server. The alarm message format as follow:
GET /api/alarm.asp？
username=username&
userpwd=password&
rea=alarm type (1=Motion Detection, 2 =Alarm from Alarm in port, 3 =Other Type)&
io=0
Alarm server need develop by customer; user can extend other functions on this server, like
SMS, MMS alarm, and mobile phone etc.
7.5 System Setting Page
7.5.1 Date and Time Setting
Please refer to above Figure 32. Select the time zone first. There are three options to set the
time and date. One is manually, another is keeping the same as the time and date on the
computer, and the third one is getting it from the NTP server.