Visit ip camera from lan, Ddress, 5 visit ip camera from lan – Vonnic C909IP H.264 Wireless 802.11b_g_n IP Network Camera User Manual

Page 9: 1 set ip address

Advertising
background image

H Series IP Camera User Manual – with Pan/Tilt of CMOS

9

2)

The PC and IP Camera are in different LANs, but they are all connected to Internet. For

the IP Camera-1 and PC-2 in Figure 5, if you want to visit IP Camera-1 by PC-2, you

should firstly do the setting as 1) to make sure that you can visit IP Camera-1 through

PC-1 and then do the setting of router-1 (do the port forwarding from the router). The

PC-

2’s visit

application could be sent through router-1 to IP Camera-1. Normally, PC-2

could only send the information to router-

1, if you don’t do the setting of router-1, then

PC-2 could not visit IP Camera-1.

5 Visit IP Camera from LAN

5.1 Set IP Address

The IP addresses of IP Camera and PC should be at the same segment, in Figure 5, the IP

Camera-1

can’t be visited. Run the HSearch_en.exe in the CD, click Search button, and then

select the IP Camera to reset the IP Camera’s IP address, as the Figure 6.

Figure 6

If you have the firewall software in your PC, when you run the HSearch_en.exe, it

may pop up a window to say if you want to block this program or not, then you

should choose not to block.

Advertising