Swanstone WB-2218 - Installation - Manual (Page 13)

S So ollv ve en ntts s H Ha az za arrd d
Follow all manufacturers’
safety instructions for silicone
sealants and denatured alcohol. Alcohol vapors are both
flammable and hazardous to breathe. Silicone vapors may
irritate eyes and nose. Personal injury can result from
improperly handling or use of products, such as denatured
alcohol. Always follow the manufacturer’s
recommendations for the safe use of these products.
Ventilate any work area before beginning to apply silicone
sealants, cleaning agents, or solvents.
7. Apply a bead of silicone around top of bowl flange. Align
and place the bowl onto the countertop.
8. Attach the sink with clips and screws. Loosely tighten the
screws.
9. If mounting the bowl with an undermount overlap, bowl
should be positioned, as shown.
10. If mounting the bowl with an undermount reveal, bowl
should be positioned, as shown.
11 . Verify bowl is in correct position and has not shifted, then
completely tighten screws. Do not overtighten.
12. Use a soft cloth with mineral spirits to remove any excess
silicone.
13. Check for a consistent seal of silicone around inside
perimeter of bowl and countertop. Add silicone if
necessary.
14. Connect the faucet supply lines per the manufacturer’s
instructions.
VI-011
VI-038
3” Wide Plywood Strip
Approx.
1/4”
3/4”
VI-039
3” Wide Plywood Strip
Approx.
1/4”
3/4”
VI-037
VI-035
WARNING
800-325-7008 13 The Swan Corporation – Swanstone
Installation Procedure