dbx DriveRack PA2 - Manual (Page 16)

12
®
Operating Modes Explained
This section describes the different operating modes available in the DriveRack PA2 and how to enter each mode.
Home Mode
This is the default operating mode. It is the mode the DriveRack PA2 enters when it initially boots and is the mode which
displays the selected Home screen. From any menu, you can get back to Home mode by repeatedly pressing the
BACK button.
How many times you must press the BACK button to return to Home mode is determined by how deeply you have navigated in
the current menu.
Wizard Mode
This mode is entered by pressing the WIZARD button. This mode is used to create a new system configuration or edit an
existing one. When running the Wizards, pressing and holding the WIZARD button will abort the Wizard and return to the main
Wizard menu.
Edit Mode
Edit mode is entered by pressing any of the INSTANT ACCESS buttons or the UTILITY button. This mode is used to edit
processing module parameters, RTA parameters, and global system parameters.
Preset Recall Mode
This mode is entered by pressing the preset RECALL button and is used to load an existing factory or user preset.
Preset Store Mode
This mode is entered by pressing the preset STORE button and is used to store the current preset to a user preset memory
location.