Way application, Legend – dbx DriveRack PA2 User Manual

Page 57

Advertising
background image

53

®

2-Way Application

This application is suited for systems using full range main speakers along with subs or for systems using bi-ampable main
speakers with no subs. In this type of application, the PA2 will split the signal into two frequency bands and send all lower
frequencies out the LOW outputs to the subs (or low frequency drivers if configuring a bi-amplified main speaker system) and
all upper frequencies out the HIGH outputs to the full range mains (or high frequency drivers if configuring a bi-amplified main
speaker system). When configuring the PA2 for this type of application, the LOW and HIGH outputs will be enabled and the
MID outputs will be disabled.

Application Notes:

• Make sure your mixer and amplifiers (or powered speakers) are turned off before making connections.

Make connections as described in ‘Making Connections’ on page 8 then apply power to the system according to

the instructions described in ‘Applying Power’ on page 10.

• Run the Setup Wizard and select the MONO input option if connecting your mixer to the PA2 via a single connection, or

select the STEREO input option if connecting the mixer to the PA2 via a left/right stereo connection.

• In the Setup Wizard, select your main and sub speakers from the list. If you’re using passive (non bi-amped) mains along

with subs, select the PASSIVE main speaker configuration option when prompted. If you’re using a bi-ampable main
speaker without subs, select the 2-WAY main speaker configuration option when prompted. If your speakers are not listed
in the PA2, use the DriveRack PA2 control app to check the online database to see if your speaker tunings have been
added. If you can’t find speaker tunings for your speakers, select the NOT LISTED option from the tuning list.

120V 50/60Hz

R

L

R

L

R

L

R

L

Left Main Speaker

Right Main Speaker

Left Sub Speaker

Right Sub Speaker

High/Mid Amp

Low Amp

or

or

Windows

®

or Mac

®

Computer

iOS

®

or Android

®

Tablet

iOS

®

or Android

®

Phone

Mixer

R L/Mono

To Power

Outlet

or

Wireless Router

LEgEND

Analog Audio Connections
Omit Connection For Mono Systems

Ethernet Connection
IEC Power Cord

Left Channel

L

Right Channel

R

Wi-Fi Signal

Advertising
This manual is related to the following products: