Specifications – dbx DriveRack PA2 User Manual
Page 68
64
®
Specifications
ANALOG INPUTS
Number of Inputs:
2 line inputs, 1 RTA mic input
Connectors:
2 female XLR line inputs, 1 female XLR RTA mic input
Type:
Electronically balanced/RF filtered
Impedance:
> 50 kΩ
Max Input Level (line inputs):
> +20 dBu
CMRR:
> 45 dB
RTA Mic Preamp Phantom Power:
+15 VDC
ANALOG OUTPUTS
Number of Outputs:
6 line outputs
Connectors:
Male XLR
Type:
Electronically balanced, RF filtered
Impedance: 120
Ω
Max Output Level:
+20 dBu
Alignment Delay:
Up to 10ms per output channel pair
A/D PERFORMANCE
A/D Converter:
24-bit with dbx Type IV™ Conversion System
A/D Dynamic Range:
112 dB A-weighted, 110 dB unweighted
Type IV Dynamic Range:
123 dB with transient material, A-weighted, 22kHz BW;
121 dB with transient material, unweighted, 22kHz BW;
115 dB typical with program material, A-weighted, 22kHz BW
D/A PERFORMANCE
D/A Converter:
24-bit
D/A Dynamic Range:
112 dB A-weighted, 110 dB unweighted
SYSTEM PERFORMANCE
Internal Processing Wordlength:
32-bit floating point
Sample Rate:
48 kHz
Dynamic Range:
110 dB A-weighted
107 dB unweighted
THD+Noise:
0.003% typical at +4 dBu, 1 kHz, 0 dB input gain
Frequency Response:
20 Hz – 20 kHz, +0 /- 0.5 dB
Interchannel Crosstalk:
< -110 dB, -120 dB typical (input-to-output: < -100 dB)
POWER SUPPLY
Operating Voltage:
100-120 VAC 50/60 Hz or 220-240 VAC 50/60 Hz
Power Consumption:
22 Watts
PHYSICAL
Unit Weight:
5.25 lbs. (2.4 kg)
Shipping Weight:
6.75 lbs. (3.1 kg)
Dimensions:
1.75” (H) x 5.75” (D) x 19” (W)
4.4cm (H) x 14.6cm (D) x 48.26cm (W)
Specifications are subject to change without notice.