Dexter Laundry T-80 Reversing (On-Premise) - Manual (Page 12)

12
TOUCH PAD DESCRIPTION
INDICATOR LIGHTS (L.E.D.s)
Description
Cycle (1 through 5) These L.E.D.s are on solid when a particular cycle is
chosen for operation or programming.
Gas Valve
This L.E.D. is part of the 4-digit numeric display and will
be on solid during the drying part of a cycle when the gas
valve does not need to be on. The L.E.D. will be flashing
when the gas valve needs to be on. The L.E.D. will not be
on solid or flashing (off) if the cycle is stopped, complete,
in cool down, or terminated.
Programming
These L.E.D.s are on solid as they are selected during the
programming of the dryer controller. The reversing L.E.D.
will also remain lit during the operation of a reversing dry
cycle.
Stop
This L.E.D. is on solid when either the STOP button is
pressed once or the door is opened during an operating
cycle.
SWITCHES (Pushbuttons)
Description
This touch pad switch will increment (increase) dry time,
cool down time, and drying temperature. It will also scroll
Up/Increase upward when selecting a dry cycle or toggle between
reversing and non-reversing mode during programming.
This touch pad switch will decrement (decrease) dry time,
cool down time, and drying temperature. It will also scroll
downward when selecting a dry cycle or toggle between
Down/Decrease reversing and non-reversing mode during programming.
This touch pad switch allows the dryer controller to enter
the permanent programming mode.
Program
SWITCHES (Pushbuttons) - continued