Dexter Laundry T-80 Reversing (On-Premise) User Manual
Page 18
18
display will flash. If you press and hold either arrow key down, you will increment (UP
arrow) or decrement (DOWN arrow) through the total dry times available (1 through 60
minutes). This displayed dry time includes the cool down time along with the heated time.
To not change the total dry time, do not press the arrow keys. Go to the next step.
5) Press and release the SELECT/ENTER key. Once this key is pressed and released, the dry
time L.E.D. will switch off, the dry cycle L.E.D. and programming L.E.D. will remain on,
and the temperature L.E.D. will illuminate. The drying temperature will also be shown on
the 4-digit numeric display.
6) Press and release the UP or DOWN arrow keys to change the drying temperature. Each
press and release of the arrow keys will either increase or decrease the temperature by five
degrees Fahrenheit or three degrees Celsius, depending on how your dryer controller is set
up. Once either of the arrow keys is pressed, the temperature L.E.D. and the drying
temperature on the 4-digit numeric display will flash. If you press and hold either arrow key
down, you will increment (UP arrow) or decrement (DOWN arrow) your way through the
available drying temperatures (105
O
Fahrenheit or 41
O
Celsius, up to 195
O
Fahrenheit or 90
O
Celsius). If you do not want to change the drying temperature, do not press the arrow keys.
Go to the next step.
7) Press and release the SELECT/ENTER key. Once this key is pressed and released, the
temperature L.E.D. will switch off, the dry cycle L.E.D. and programming L.E.D. will remain
on, and the cool down L.E.D. will illuminate. The cool down time will also be shown on the
4-digit numeric display.
8) Press and release the UP or DOWN arrow keys to change the cool down time. Once either of
the arrow keys is pressed, the cool down L.E.D. and the cool down time on the 4-digit
numeric display will flash. If you press and hold either arrow key down, you will increment
(UP arrow) or decrement (DOWN arrow) through the cool down times available (2 through
60 minutes if the controller has a red dot sticker or 2 through 15 minutes if the controller has
no red dot sticker). To not change the cool down time, do not press the arrow keys. Go to
the next step.
9) Press and release the SELECT/ENTER key. Once this key is pressed and released, the cool
down L.E.D. will switch off, the dry cycle L.E.D. and programming L.E.D. will remain on,
and the reversing L.E.D. will illuminate. Either “rEv” (reversing mode) or “nrEv” (non-
reversing mode) will also be shown on the 4-digit numeric display.
10) Press and release the UP or DOWN arrow keys to switch between reversing and non-
reversing operation. Once either of the arrow keys is pressed, the reversing L.E.D. and the
“rEv” (reversing mode) or the “nrEv” (non-reversing mode) shown on the 4-digit numeric
display will flash. To not change the reversing or non-reversing mode of operation, do not
press the arrow keys. Go to the next step.
11) Press and release the SELECT/ENTER key. Once this key is pressed and released, the