Factory Direct Hardware Hansgrohe 10456 Axor Starck - Manual (Page 4)

4
non-staining bathroom sealant suitable for the floor material.
Gently guide the escutcheon to the floor. Insert a black rubber
gasket in one end of the hose, and screw it to the hose outlet.
Insert a second black rubber washer in the other end of the hose
and screw it to the handshower. Seat the handshower in the
handshower holder.
User Instructions:
• Pivot the lever handle up to turn the water on.
Pivoting the handle to the left makes the water
warmer, to the right makes the water cooler.
• When the water is turned on, it will come
out through the spout. To divert water to the
handshower, pull the end of the spout.
• When the water is turned off, the diverter will
automatically re-set to the spout position.
• The handshower uses the Rubit! TM self cleaning
system. If mineral scale deposits are noticed
in the spray channels, clear them by turning
the water on lightly and rubbing across the
spray channels with a finger or a sponge.
• To protect against back siphonage, a check valve is installed to the handspray connection. It should
be removed and cleaned yearly.