Factory Direct Hardware Hansgrohe 14314 Talis C - Manual (Page 3)


Installation Considerations
For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
Four-hole trim kits are for use only with rough
06646000.
Three-hole trim kits are for use only with rough
06607000.
•
•
•
•
Technical Information
Recommended water pressure 15 - 75 psi
Max. water pressure 147 psi
Recommended hot water temp. 120° - 140° F*
Max. hot water temp 165°F*
Flow rate – handshower 2.5 gpm max.
*Please know and follow all applicable local plumbing codes when
setting the temperature on the water heater.
The rough valve must be installed, and the
mounting surface must be finished and made
watertight before installation of this trim kit.
Four-hole models only: Protection against
backflow is provided by check valve and an
automatically resetting diverter.
Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
•
•
•