Factory Direct Hardware Schlage FE576CAM505PLY - Manual (Page 2)

5
Install 9V battery into Keypad Exterior.
6
Install AAA batteries into Alarm Interior.
7
Install Keypad Exterior.
Bar should slide
smoothly through
hole in latch. If
not, check door
dimensions.
3
Change faceplate, if necessary.
Choose the drawing that matches your door edge. If the hole has no mortise,
change to the circular faceplate.
No change necessary.



4
Install Latch.
Make sure latch angle faces door jamb.
Angle Angle
Wood Block (not
included)
Interior
Actual Size (2)