Factory Direct Hardware Schlage FE576CAM505PLY - Manual (Page 3)

8
If needed, switch levers.
Correct
No change necessary.
Incorrect

a. For the Keypad Exterior, insert the pin wrench
into the hole in the lever. Push in and hold.

b. Pull the lever off.

c. Repeat steps a and b to remove the lever from the Alarm
Interior.

d. Rotate the chassis so lever catch is on the other side. Then
use the lever from the Keypad Exterior to reassemble the
Alarm Interior.

e. Put the lever from the Alarm Interior on the Keypad
Exterior.
Note location
of lever catch.
Lever catch now on
other side of chassis.
Lever from Keypad
Exterior
Lever from Alarm
Interior