Buyers 5412000 - Manual

1
Installation Instructions
5412000 Van Partition
Figure 1
5412000 - Shown with
optional hinge and lock
hardware kit (5412010)
—continued inside
Applications:
GM full-size vans: 1997 to current.
Ford full-size vans: 1996 to current.
Before Assembling:
Before assembling your Buyers Products' van partition,
it is important to read, understand, and follow all listed instructions.
The following instructions are for the installation of the #5412000
van partition only. If you are also installing the optional hinge and
lock hardware kit #5412010, please refer to page 5 for additional
installation instructions.
Note: Depending on van model, year and design, additional
modifications may be necessary to the van partition for proper fit
and installation.
Step 1: Assemble file holder #3018247
Assemble the file holder #3018247 to the center (door) panel #3018244
using the following hardware:
(4) 1/4"-20 x 3/4" Bolts
(4) 1/4" Washers
(4) 1/4"-20 Lock nuts
Make sure file folder opening is facing towards the
driver/passenger-facing side of the panel.
Figure 2
Cargo area
Passenger
Side Panel
Driver
Side Panel
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax 800-841-8003
www.buyersproducts.com