Buyers 5412000 - Manual (Page 3)

3
Figure 5
Figure 6
Step 5: Insert the strap roof brackets #3018422
into the van partition and attach to van roof.
Rotate the van partition assembly away from the
van roof slightly and insert the (4) roof brackets
into the slots provided on the top of the driver-side
and passenger-side panels. Select the slot that
fits most closely to the height of your van roof.
See Figure 5.
Fasten the braces to the panels but do not
completely tighten the following hardware:
(4) 1/4"-20x 3/4" Bolts
(4) 1/4" Washers
(4) 1/4"-20 Lock Nuts
Step 6: Assemble the two driver-side wall brackets
#3018423
To assemble the driver-side brackets to the van partition,
use the mounting holes that best align with the rib or wall
of your van. Use the following hardware to attach:
(2) 1/4"-20 x 3/4" Bolts
(2) 1/4" Washers
(2) 1/4"-20 Lock Nuts
Note: Make all hardware snug, but do
not tighten at this time.