1introduction – SENA ProBee-ZE20S User Manual

Page 11

Advertising
background image

11

ProBee-ZE20S User Guide Rev.1.10

1

Introduction

1.1

About This Document

This document provides an introduction on configuration and operation of the ProBee-ZE20S ZigBee

OEM module. This document assumes the user is using the ZE20S starter kit for evaluation hence the

pictures and configuration examples shown in this document are all based on the ZE20S starter kit.

This document does not provide full detail of the hardware specifications. Please refer to the ProBee-

ZE20S data sheet for further references on the hardware design.

1.2

Overview

The ProBee-ZE20S is an all-in-one ZigBee OEM module with integrated ZigBee core and radio/antenna

circuits together with high level software library. Using the ZE20S, OEM manufacturers can easily and

cost-effectively integrate ZigBee functionality into target products in timely manner.

The ZE20S OEM module is designed to meet specific requirements of low cost and low power wireless

applications such as Home Automation, Smart Energy, Health care, Building Automation and Telecom

Services by adopting the ZigBee technology. The ZE20S is based on the Ember EM357 ZigBee core and

certified ZigBee Alliance based on ZigBee 2007 and ZigBee Pro stack.

Despite of its low cost and low power consumptions, the ZE20S provides high performance and robust

data transfer capability for wide range of applications. The ZE20S can transfer data at up to 250 kbps and

reach up to 300 m (0.19 miles) outdoor line-of-sight.

Key Features

Integrated 2.4GHz, IEEE 802.15.4-2003 compliant transceiver

ZigBee 2007 / ZigBee Pro stack

ZigBee core: Ember EM357

Transmit Power: +8dBm (Boost mode)

Receiver Sensitivity: -102dBm @1% BER (Boost mode)

Supply Voltage: 2.1~3.6 VDC

TX Current: 45mA @3.3V (max.)

RX Current: 31mA @3.3V (max.)

Sleep Current: ≤1uA

Working Distance: 300 m (0.19 miles) @ 3.3V, +5dBi Dipole Antenna

Various Antenna/Connector Options: Dipole 1/3/5dBi, U.FL, RPSMA, Chip

UART Signals Support: UART_TXD/RXD, RTS/CTS, DTR/DSR

6 Analog Inputs

17 Digital Inputs/Outputs

Advertising