SENA ProBee-ZE20S User Manual

Page 54

Advertising
background image

54

ProBee-ZE20S User Guide Rev.1.10

AT+PANID=7772

OK

ATS42=1

OK

AT+DESTLA=0001950000000001

OK

AT+GPIO=11111111111441111

OK

ATZ

OK

6.4.3

End-device Configuration

Hardware configuration for the end-device is as follows:

Set the ADC_2 and ADC_3 switch to TEMP_SENS and LIGHT_SENS

The AT commands for coordinator configuration is as follows:

AT+NODETYPE=4

OK

AT+PANID=7772

OK

ATS42=1

OK

AT+DESTLA=0001950000000001

OK

AT+GPIO=11111111111441111

OK

ATZ

OK

6.4.4

Monitoring the Sensors

Once the configurations are done and the system is running, the terminal (computer) connected to the

coordinator will print out the incoming data as follows:

++0001950000000002|10000000000**0000|****,****,233E,006A,****,****

++0001950000000003|10000000000**0000|****,****,2254,0B23,****,****

++0001950000000002|10000000000**0000|****,****,2235,004E,****,****

++0001950000000003|10000000000**0000|****,****,226C,0B8B,****,****

Advertising