SENA ProBee-ZE20S - Manual (Page 42)

42 ProBee-ZE20S User Guide Rev.1.10
the same rules.
Example)
ATS35=2<CR> # Set broadcast range to all nodes in the network
OK<CR> # Response
ATB<CR> # Enter the broadcast mode
OK<CR> # Response
Send broadcast msg # Put the broadcast message
+++ # Leave data mode
OK<CR> # Response
AT+TRANSMITMODE=3<CR> # Set transmission mode to current network
OK<CR> # Response
ATZ<CR> # Apply to change
OK<CR> # Response
Send broadcast msg # Put the broadcast message
+++ # Leave data mode
OK<CR> # Response