SENA ProBee-ZE20S User Manual
Page 87
![background image](/manuals/292712/87/background.png)
87
ProBee-ZE20S User Guide Rev.1.10
2: send to all nodes in the network
Execute
ATS35?<CR>
ATS35=<value><CR>
Response
<value><CR>
OK<CR>
OK<CR>
Default
2
Range
0 – 2
9.3.6
S36
Description
Get/Set the maximum number of hops the message will be relayed. The message will
be delivered to all nodes within this number of hops of the sender. A value of zero is
converted to maximum value(30). It is used to multicast/broadcast.
Execute
ATS36?<CR>
ATS36=<value><CR>
Response
<value><CR>
OK<CR>
OK<CR>
Default
0
Range
0 – 30
9.3.7
S37
Description
Get/Set the number of hops that the message will be forwarded by devices that are not
members of the group. A value of zero, 7 or greater is treated as infinite.
Execute
ATS37?<CR>
ATS37=<value><CR>
Response
<value><CR>
OK<CR>
OK<CR>
Default
0
Range
0 – 7
9.3.8
S38
Description
Get/Set the receive message mode. If it is enabled, a local node will receive multicast
or broadcast messages from itself.
Execute
ATS38?<CR>
ATS38=<value><CR>
Response
<value><CR>
OK<CR>
OK<CR>
Default
0
Range
0 – 1
9.3.9
S39
Description
Get/Set the receive mode. If S39 is enabled, a local node will only receive the same
type of messages with its transmission mode. For example, if local node’s
transmission mode is broadcast mode (AT+TM=3), it will receive only broadcast