OSRAM EASY Color Drive - Manual

OSRAM GmbH
Kunden Service Center
Customer-Service-Center (CSC)
Steinerne Furt 62
86167 Augsburg
Germany
Tel : +49 (0) 1803 677 - 200
(kostenpflichtig / charges apply)
Fax.: +49 (0) 1803 677 - 202
www.osram.com
www.osram.de
40083214217776
4008321421777
Page 1 of 2
Wall operating unit
Configuration
VIII 2009
EASY_Color_Drive_ko0908en_we1.01.indd
EASY Color Drive
speed esc
F2
C
D
F1
F4
A
- +
LEARN SETUP RF
3 A
Setup menu
General information
The optional user settings of the wall operating unit are config-
ured in the Setup menu.
Calling up the Setup menu
Press buttons F1+F2 simultaneously and hold for at least 5 s
until the Setup symbol (3) appears on the display (A).
Navigating and configuring
Select menu item/setting: Use the jog wheel (D)
Confirm selection: Press the central button (C)
Cancel and return: Press button F4 briefly
Leaving the Setup menu
Press button F4 and hold for at least 3 s or select the „Exit“
menu item.
Parameter settings
The menu items for configuration are described below.
Default or reset settings are
highlighted in bold.
Menu item Function
Backlight
B. color
B. brightn.
B. timeout
Nightlight
Background lighting
Colour ( 1…12)
Brightness (off, low, mid, high)
Switch-off delay time or time to return to
standby ( 3 s, 5 s, 10 s)
Orientation lighting for the central button
(external power supply required)
Default
Brightness
Color
Scenes
Last func.
None
Jog wheel basic function
Changing the brightness
Change the colour/colour temperature
Call up scenes
Function selected last
None
Switch On
Last state
Scene 1…16
100%
Switch on
To last state
To scene A1…A16
All channels to 100%
Channel set
RGB
RGB+ white
Warm/Cold
8-Ch. … 1-Ch.
Channel control
3-channel colour control
3-channel colour control with white
channel
2-channel colour temperature control
Ch-1 = warm-white channel
Ch-3 = cold-white channel
8-channel/8-groups- …
1-channel/1-group control
Scene set
Scenes 1-8
Scenes 9-16
Scene range
A1-A8
A9-A16
Scenes
Scene 1…8
Scene 9…16
Scenes that can be called up from the
scene range (see "Scene set")
A1…A8 (enabled=available / disabled =
not available)
A9…A16
Sequence
Sequence A…D Sequence A...D can be called up/cannot
be called up via F3 button
Speed set
Fade Time
Multiplier
Disabled
Speed setting
Via fade time
Via speed factor
Disabled
Buttons
F1-Color
F2-Brightness
F3-Play
F4-Stop
Jogwheel
C1-On/Off
Enable/disable buttons
F1
F2
F3
F4
Jog wheel
On/off button
Service
Demo Mode
Reset Start demo mode
Reset wall transmitter to default settings
Exit Leave the Setup menu