OSRAM COINlight Pro - Manual

1
Installation instructions for MR16 luminaires
Product overview
The following products are required for the replacement of
an MR16 halogen lamp (or for initial installation):
• COINlight Pro (LED module)
• Matching OPTOTRONIC control gear
1. Disconnect the existing lamp socket from the existing
control gear.
Instructions
2. Open the lamp housing.
3. Remove the existing lamp. 4. Insert the COINlight Pro LED module into the lamp
housing, then insert both into the MR16 housing.
Replacing an MR16 halogen lamp with a round COINlight Pro LED module is very easy and can be done within minutes.
The following instructions are also applicable for initial installations of LED luminaire systems.*
*Please observe the safety and mounting information specifi ed in the product data sheets.