SCANTECH ID (Champtek company) WD200 - Manual (Page 7)

4
1.2 Introduction
The Decoder is an advanced and versatile
decoding facility for barcoding systems .It works
with variety of bar code types, reading devices,
and computer interfaces. It discriminates about
twenty different symbologies automatically.
This manual provides an easy way to configure
the decoding options and interface selections by
scanning bar codes listed in the menu.
1.3 Codes Read
. Codes Read
All UPC/EAN/JAN, Code 39, Code 39 Full ASCII, Code
128, Interleave 25, Industrial 25, Matrix 25,
CODABAR/NW7, Code 11, MSI/PLESSEY, Code 93,
China Postage, Code32 / Italian Pharmacy, others
available upon request.
1.4 Installation
Unpacking -
Remove the scanner from its packing and check it
for damage. If the scanner was defected in transit,
please contact your vendor immediately. Be sure
that you keep the packing with all accessories
contains in the package for your returning of
service.
Connecting the scanner -
Keyboard wedge / RS-232C / USB:
Connect the 10-pins RS-45 male connector into
the bottom of the scanner and you will hear a
“click” when the connection is made.