SCANTECH ID (Champtek company) WD200 - Manual (Page 71)

7.3 Sleep Mode
The scanner is equipped with sleep mode function
to save battery energy when the scanner is not used
for 1 minute or 10 minutes. During sleep mode, all
the functions and connection will be halted until
pressing the trigger button. The communication with
cradle or Bluetooth device will be reconnected.
Sleep Mode 1 min. ON
Sleep Mode10 min. ON
<Sleep Mode OFF>
7.4 Batch Mode
“***” means “Quick Setting Label”. The function can be
executed directly by scanning barcode instead of doing the
general programming process.
Batch Mode On
< Batch Mode Off>
*** Batch Data Read
*** Batch Data Clear
***Delete Last Data
68