GE Industrial Solutions AF-600 FP Fan & Pump Drive (230V to 60HP, 460_575V to 125HP) - Manual (Page 4)

Contents
1 Introduction 4
1.1 Purpose of the Manual 6
1.2 Additional Resources 6
1.3 Product Overview 6
1.4 Internal Drive Controller Functions 6
1.5 Unit Sizes and Power Ratings 7
2 Installation 8
2.1 Installation Site Check List 8
2.2 Drive and Motor Pre-installation Check List 8
2.3 Mechanical Installation 8
2.3.1 Cooling 8
2.3.2 Lifting 9
2.3.3 Mounting 9
2.3.4 Tightening Torques 9
2.4 Electrical Installation 10
2.4.1 Requirements 11
2.4.2 Earth (Grounding) Requirements 12
2.4.2.1 Leakage Current (>3,5mA) 12
2.4.2.2 Grounding Using Shielded Cable 13
2.4.2.3 Grounding Using Conduit 13
2.4.3 Motor Connection 13
2.4.4 AC Mains Connection 14
2.4.5 Control Wiring 15
2.4.5.1 Access 15
2.4.5.2 Control Terminal Types 15
2.4.5.3 Wiring to Control Terminals 16
2.4.5.4 Using Screened Control Cables 17
2.4.5.5 Control Terminal Functions 17
2.4.5.6 Terminal 53 and 54 Switches 17
2.4.6 Serial Communication 18
3 Start Up and Functional Testing 19
3.1 Pre-start 19
3.1.1 Safety Inspection 19
3.1.2 Start Up Check List 20
3.2 Applying Power to the Drive 21
3.3 Basic Operational Programming 21
3.4 Auto Tune 21
3.5 Check Motor Rotation 22
Contents AF-600 FP Operating Instructions
1