GE Industrial Solutions AF-600 FP High Power (460V_575V 150HP and above) - Manual (Page 118)

7.2.12 SCR/Diode Module 41/43 Units
1. Remove the capacitor bank per instructions.
2. Remove the input terminal mounting plate per instructions.
3. Remove the retaining screw (T25) from terminal 1 of each SCR/diode module.
4. Remove the 8 mm retaining nut from the bus bar holding bracket and remove the bus bar, one for each input phase.
CONTINUED ON NEXT PAGES
130BX165.10
1
2
3
4
5
Illustration 7.1: 41/43 SCR/Diode Module (1 of 3)
1 Bus bar BB2 (Step 4)
2 Retaining screw access (Step 3)
3 Retaining nut (Step 4)
4 Bus bar BB1
5 SCR/diode module
AF-650 GP and AF-600 FP High Power Service Manual
117
7