GE Industrial Solutions AF-600 FP High Power (460V_575V 150HP and above) User Manual
Page 16
Status display I:
This readout state is standard after start-up or initialisation.
Use [INFO] to obtain information about the value/measurement linked to the
displayed operating variables (1.1, 1.2, 1.3, 2, and 3).
See the operating variables shown in the display in this illustration. 1.1, 1.2
and 1.3 are shown in small size. 2 and 3 are shown in medium size.
130BP041.10
1.1
1.3
2
1.2
3
Status display II:
See the operating variables (1.1, 1.2, 1.3, and 2) shown in the display in this
illustration.
In the example, Speed, Motor current, Motor power and Frequency are se-
lected as variables in the first and second lines.
1.1, 1.2 and 1.3 are shown in small size. 2 is shown in large size.
Status display III:
This state displays the event and action of the Logic Controller.
The Bottom section always shows the state of the frequency converter in
Status mode.
Display contrast adjustment
Press [status] and [
▲
] for darker display
Press [status] and [
▼
] for brighter display
130BP074.10
Top section
Middle section
Bottom section
AF-650 GP and AF-600 FP High Power Service Manual
15
2