Waveform, Waveform - 7 – GE Industrial Solutions MX350 Instruction manual User Manual
Page 107
Advertising
![background image](/manuals/295710/107/background.png)
CHAPTER 7: DIAGNOSTICS
WAVEFORM
MX350 AUTOMATIC TRANSFER CONTROL SYSTEM – INSTRUCTION MANUAL
7–7
Waveform
The Home > Diag > Waveform page displays information regarding the date and time of
the waveform capture as well as the event that triggered it.
The setup for the wave form capture is performed on Home > Diag > Waveform.
Figure 7: Typical Waveform information page
Advertising