GE Industrial Solutions MX350 Instruction manual User Manual
Page 38
![background image](/manuals/295710/38/background.png)
3–8
MX350 AUTOMATIC TRANSFER CONTROL SYSTEM – INSTRUCTION MANUAL
GRAPHICAL CONTROL PANEL
CHAPTER 3: INTERFACING WITH THE MX350 AT CONTROLLER
Some typical actual values screens are shown below.
Figure 8: Typical actual values summary page
Figure 9: Typical actual values current page
Figure 10: Typical actual values voltage page
Status pages
The status pages provide the user with up-to-date information on the current status of the
ATS that the MX350 is controlling.
Status pages are divided into five sections.
•
Message (displays all locked out conditions plus conditions such as alarms, internal
faults, control status, etc.).
•
Inputs (displays the present state of assigned contact inputs).
•
Outputs (displays the present state of assigned contact outputs).
•
System (displays the present state of the communications interface).