Adding setpoints files to the environment, Creating a new setpoints file – GE Industrial Solutions MX350 Instruction manual User Manual
Page 55
CHAPTER 3: INTERFACING WITH THE MX350 AT CONTROLLER
ENERVISTA™ MX350 SETUP SOFTWARE
MX350 AUTOMATIC TRANSFER CONTROL SYSTEM – INSTRUCTION MANUAL
3–25
4.
After a few seconds of data retrieval, the software will request the name and
destination path of the setpoint file. The corresponding file extension will be
automatically assigned. Press Receive to complete the process. A new entry will be
added to the tree, in the File pane, showing path and file name for the setpoint file.
Adding setpoints files
to the environment
The software provides the capability to review and manage a large group of setpoint files.
Use the following procedure to add an existing file to the list.
1.
In the files pane, right-click on Files and select the Add Existing Setting File item as
shown:
2.
The Open dialog box will appear, prompting the user to select a previously saved
setpoint file. As for any other MS Windows® application, browse for the file to be
added then click Open. The new file and complete path will be added to the file list.
Creating a new
setpoints file
The software allows the user to create new setpoints files independent of a connected
device. These can be uploaded to a relay at a later date. The following procedure illustrates
how to create new setpoints files.